Shop trusted, shop hbno.com
Advanced Distillation & Global Industrial Manufacturing | +1 530 399 3782

Are you a business owner, formulator, or reseller?

We supply bulk oils and private label solutions built for businesses. Get your quote or start your brand today.

Ylang Ylang Has Five Grades, and Most Formulators Are Buying the Wrong One

Ylang Ylang Has Five Grades, and Most Formulators Are Buying the Wrong One
DEBUG-1: nullDEBUG-2: nullDEBUG-3: settings=true show=false

Ylang ylang oil grades are not a single specification a buyer can order by name and trust to perform the same way twice. Cananga odorata flowers release their aromatic compounds in sequence across a steam distillation that can run 15 to 20 hours, and each grade, Extra, First, Second, Third, and Complete, captures a different slice of that sequence with a genuinely different constituent profile. A formulator who orders "ylang ylang oil" without specifying a grade is gambling on whichever fraction the supplier has on hand, and one who assumes the priciest grade is always correct often pays for perfume. ry-grade pricing for a base note; a cheaper, later fraction would have handled just as well. At HBNO, we supply Ylang Ylang #3 with a GC/MS profile that makes this decision concrete instead of theoretical.

How the Five Ylang Ylang Grades Actually Split During Distillation

Ylang ylang's grades are defined by when a fraction is drawn off during steam distillation, not by any difference in plant material or origin. Fresh Cananga odorata var. genuina flowers, hand-picked at dawn in Madagascar and the Comoros, are loaded whole into a still and distilled continuously, with the condensate collected as a sequence of fractions rather than one uniform batch. Extra grade is drawn in the first hour or two and carries the highest concentration of light, volatile esters and ethers, the constituents behind the sweetest, most diffusive top note. First and second grade follow as distillation continues and the balance shifts: ester content falls while heavier sesquiterpenes accumulate. Third grade comes off last, dominated by that sesquiterpene fraction, giving a deeper, more earthy, less diffusive character. Complete oil is either an uninterrupted single run capturing the whole aromatic range or a recombination of fractions blended back together. None of this is cosmetic labelling. It is a direct consequence of which compounds boil off first, and a Certificate of Analysis will confirm it either way.

Reading the GC/MS Data: Which Markers Signal Which Grade

A Certificate of Analysis tells a buyer which grade they actually received, regardless of what the label says, once the ester-to-sesquiterpene ratio is read correctly. HBNO's Ylang Ylang #3 batch specification lists germacrene D at a typical 18 percent (range 15 to 34), alpha-farnesene at 19 percent (9 to 25), beta-caryophyllene at 13 percent (12 to 19), and geranyl acetate at only 3.6 percent (1 to 6.6), alongside a specific gravity of 0.905 to 0.93 and a refractive index of 1.495 to 1.515. That combination, sesquiterpenes dominant, esters minor, is the chemical fingerprint of a genuine late-cut fraction rather than a marketing name. Higher grades run the ratio in the opposite direction: published data on extra and first-grade fractions shows geranyl acetate, benzyl acetate, and linalool running into double digits, with sesquiterpenes as the minor share. A buyer who asks for GC/MS data before a bulk order is checking grade authenticity directly rather than trusting a name on faith, the same discipline covered generally in Gas Chromatography-Mass Spectrometry (GC-MS): How We Verify Every Batch.

Matching the Grade to What You're Actually Formulating

The right ylang-ylang grade is decided by the finished product's cure process and note structure, not by price point. Fine fragrance and alcohol-based compositions built around a floral top accord call for Extra or First grade, because the higher ester content survives dilution and carries scent through the drydown. Cold-process soap and candle wax, where the fragrance passes through a heat step and the most volatile esters largely burn off during cure regardless of grade, are usually served just as well by third-grade or complete oil at a lower cost per kilo, since sesquiterpene-heavy fractions hold their character better under heat and anchor a base note longer. Lotions and leave-on emulsions sit in between, typically formulated with second- or complete-grade products at moderate cost. Ylang ylang also carries a documented skin sensitisation profile, so formulators building leave-on products should confirm category limits and the batch's sensitisation data before setting a dilution rate.

Sourcing Bulk Ylang Ylang Oil Grades: Origin, Season, and Batch Consistency

Because ylang ylang is fractionated in real time during distillation, batch-to-batch consistency depends more on the distiller's cut discipline than on the botanical source alone. Madagascar and the Comoros supply most commercial volume, and flowers must move from harvest to still within hours, or the ester fraction degrades before distillation starts, which is part of why grade names mean different things across suppliers. That variability is reason enough to request a batch-specific CoA rather than relying on the grade label alone.

A receiving lab has a second lever beyond the chromatogram, and it is faster. Ylang ylang's optical rotation is strongly negative, sitting between minus 70 and minus 30 degrees on our Ylang Ylang #3, so a polarimeter reading outside that window flags a diluted or blended lot on the receiving dock, days before the GC/MS result returns. Buyers should also build freight and warehousing around a flash point of 75 degrees Celsius, which places the material in flammable liquids hazard category 4 for shipping documentation, and around a two-year shelf life held between 15 and 25 degrees Celsius. Glass, PET, aluminium, and epoxy lacquer-lined stainless steel are all suitable drum linings, Reach

Where HBNO Fits Into a Grade-Specific Sourcing Program

At HBNO, every ylang-ylang shipment leaves our Chico, California, facility with a batch-specific CoA and SDS, so the grade a buyer is quoted is the grade the GC/MS data confirms. Our Ylang Ylang #3 is Kosher certified through EarthKosher, GC/MS tested in-house, and manufactured to cosmetic-grade specification. We also carry an organic-labelling ylang ylang oil, a ylang ylang natural fragrance for formulators who need a fragrance-grade option rather than an essential oil, and a ylang ylang hydrosol for aqueous-phase work, all listed alongside the rest of our natural fragrance range. Our facility holds Kosher and USDA Organic certification and staffed by PhD chemists running in-house quality control on every batch in our essential oils range. Private label production runs up to 250,000 units per day, and we ship globally.

Frequently Asked Questions

What are the five grades of ylang ylang essential oil?

The five grades, drawn off in sequence during distillation, are Extra, First, Second, Third, and Complete. Extra and First carry the highest ester content and the most diffusive floral top note. Second and third shifts are toward a heavier, sesquiterpene-dominant, earthy profile, and Complete is a full uninterrupted run or a recombined blend of the fractions.

How is a ylang ylang grade determined during distillation?

The grade is determined by when a fraction is collected during a single continuous steam distillation that can run for 15 to 20 hours. The most volatile esters come off first and define the extra grade, while heavier sesquiterpenes dominate the later fractions. It is a cut-point decision, not a difference in the flowers themselves.

Which ylang ylang grade should a fine fragrance formulator specify? 

Extra or first grade, since their higher ester content, geranyl acetate and benzyl acetate, among them, carries scent throw through an alcohol-based composition's drydown. A GC/MS report confirming that ester content sits in range is the reliable way to verify the grade before a production-volume order.

Is HBNO's Ylang Ylang #3 an extra grade or a third grade oil?

It is a third-grade oil: germacrene D, alpha-farnesene, and beta-caryophyllene make up the bulk of the profile, while geranyl acetate sits at only a few per cent. That sesquiterpene-forward signature suits soap, candle, and other heat-processed or base-note applications where cost efficiency matters more than top-note diffusion.

Should a buyer request GC/MS data before ordering bulk ylang ylang oil? 

Yes. Grade names are not standardised across suppliers, and the only way to confirm which fraction a shipment contains is to compare its GC/MS profile, specific gravity, and refractive index against a reference range. A supplier that cannot produce a batch-specific CoA on request is not reliable for a grade-sensitive order.

Ylang ylang oil grades exist because fractional distillation produces genuinely different chemistry at different points in the run, not because suppliers invented a pricing tier. The grade that belongs in a formulation is the one whose GC/MS profile matches the note structure and cure process the finished product requires, and confirming that match before the order ships is cheaper than reformulating after it arrives. For batch-specific GC/MS data and current availability across HBNO's ylang ylang line, contact our team directly.

Published by the HBNO editorial team. HBNO (IL Health & Beauty Natural Oils Co., Inc.) is a manufacturer and bulk supplier of essential oils and carrier oils based in Chico, California.


Leave a comment

Please note: comments must be approved before they are published.